Cisco Firepower 2120 User Manual

Statement 1053—Class 1M Laser Radiation
Class 1M laser radiation when open. Do not view directly with optical instruments.
Warning
Statement 1055—Class I and Class 1M Laser
Class I (CDRH) and Class 1M (IEC) laser products.
Warning
Statement 1056—Unterminated Fiber Cable
Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do not
view directly with optical instruments. Viewing the laser output with certain optical instruments (for
example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard.
Warning
Statement 1057—Hazardous Radiation Exposure
Use of controls or adjustments or performance of procedures other than those specified may result in
hazardous radiation exposure.
Warning
The SFP/SFP+ transceiver is a bidirectional device with a transmitter and receiver in the same physical
package. It is a hot-swappable optical interface that plugs into the SFP/SFP+ ports on the fixed ports and the
network module ports, and provides Ethernet connectivity.
Figure 13: SFP
Bail clasp2Dust plug1
Transmit optical bore4Receive optical bore3
Cisco Firepower 2100 Series Hardware Installation Guide
21
Overview
Supported SFP/SFP+ Transceivers

Cisco Firepower 2120 Specifications

General

Brand	Cisco
Model	Firepower 2120
Category	Firewall
Language	English