Cisco IOS XE Intelligent Services User Manual

Configuring MQC Support for IP Sessions
Additional References
6
Router(config-pmap)# class EF-WAN
Router(config-pmap-c)# police cir 200000000
Router(config-pmap-c-police)# priority
Router(config-pmap-c)# class class-default
Router(config-pmap-c)# policy-map type service PREMIUM_SERVICE
Router(config-service-policymap)# service-policy input PREMIUM_MARK_IN
Router(config-service-policymap)# service-policy output PREMIUM_UB_OUT
Router(config-service-policymap)# policy-map type control INT
Router(config-control-policymap)# class type control always event account-logon
Router(config-control-policymap-class-control)# 1 service-policy type service name
PREMIUM_SERVICE
Router(config-control-policymap-class-control)# interface GigabitEthernet0/0/0
Router(config-if)# ip address 10.0.0.1 255.255.255.0
Router(config-if)# pppoe enable group global
Router(config-if)# service-policy type control INT
Additional References
The following sections provide references related to the MQC Support for IP sessions feature.
Related Documents
MIBs
Related Topic Document Title
How to configure ISG control policies “Configuring ISG Control Policies” chapter in Cisco IOS XE
Intelligent Services Gateway Configuration Guide
How to configure QoS policies using the MQC Cisco IOS XE Quality of Service Solutions Configuration Guide
ISG commands Cisco IOS Intelligent Services Gateway Command Reference
MIB MIBs Link
No new or modified MIBs are supported by this
feature.
To locate and download MIBs for selected platforms, Cisco IOS XE
releases, and feature sets, use Cisco MIB Locator found at the
following URL:
http://www.cisco.com/go/mibs

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English