Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006–2009 Cisco Systems, Inc. All rights reserved.
Configuring ISG Control Policies
First Published: March 20, 2006
Last Updated: November 25, 2009
Intelligent Services Gateway (ISG) is a Cisco IOS XE software feature set that provides a structured
framework in which edge devices can deliver flexible and scalable services to subscribers. ISG control
policies are a means of defining the actions the system will take in response to specified conditions and
events. A wide variety of system actions, conditions, and events can be combined using a consistent
policy language, providing a flexible and precise way of configuring ISG. This module provides
information about how to configure ISG control policies.
Finding Feature Information
For the latest feature information and caveats, see the release notes for your platform and software
release. To find information about the features documented in this module, and to see a list of the releases in
which each feature is supported, see the “Feature Information for ISG Control Policies” section on page 21.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS XE software
image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Prerequisites for Configuring ISG Control Policies, page 2
• Restrictions for Configuring ISG Control Policies, page 2
• Information About ISG Control Policies, page 2
• How to Configure an ISG Control Policy, page 4
• Configuration Examples for ISG Control Policies, page 15
• Additional References, page 20
• Feature Information for ISG Control Policies, page 21
To Next Page
Loading...
Need help?
General