EasyManuals Logo
Home>Cisco>Gateway>IOS XE Intelligent Services

Cisco IOS XE Intelligent Services User Manual

Cisco IOS XE Intelligent Services
358 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
Configuring ISG Access for PPP Sessions
Additional References
12
ip local pool DEF-POOL 172.16.5.1 172.16.5.250
ip local pool POOL-RED 172.20.5.1 172.20.5.250
Service profile for ISP RED
Cisco-AVpair = ip:vrf-id=RED
Cisco-AVpair = "ip:ip-unnumbered=loopback 1"
Cisco-AVpair = ip:addr-pool=POOL-RED
Cisco-AVpair = subscriber:sg-service-type=primary
Cisco-AVpair = subscriber:sg-service-group=RED-GROUP
Cisco-SSG-Service-Info = IPPPOE-RED
Cisco-SSG-Service-Info = R10.1.1.0;255.255.255.0
Framed-Protocol = PPP
Service-Type = Framed
Additional References
The following sections provide references related to ISG access for PPP sessions.
Related Documents
Related Topic Document Title
ISG commands Cisco IOS Intelligent Services Gateway Command Reference
AAA configuration tasks The “Authentication, Authorization, and Accounting (AAA)”
section in the Cisco IOS XE Security Configuration Guide
AAA commands Cisco IOS Security Command Reference
PPP configuration tasks The “PPP Configuration” section of the Cisco IOS XE Dial Services
Configuration Guide
PPP commands Cisco IOS Dial Services Command Reference

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco IOS XE Intelligent Services and is the answer not in the manual?

Cisco IOS XE Intelligent Services Specifications

General IconGeneral
BrandCisco
ModelIOS XE Intelligent Services
CategoryGateway
LanguageEnglish

Related product manuals