Cisco IOS XE Intelligent Services User Manual

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Configuring ISG Accounting
First Published: March 20, 2006
Last Updated: June 25, 2009
Intelligent Services Gateway (ISG) is a Cisco IOS and Cisco IOS XE software feature set that provides
a structured framework in which edge devices can deliver flexible and scalable services to subscribers.
This module describes how to configure ISG accounting, including per-session accounting or per-flow
accounting, per-service accounting, broadcast accounting, and postpaid tariff switching.
Finding Feature Information
For the latest feature information and caveats, see the release notes for your platform and software
release. To find information about the features documented in this module, and to see a list of the releases in
which each feature is supported, see the “Feature Information for ISG Accounting” section on page 24.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS XE software
image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Prerequisites for ISG Accounting, page 2
• Restrictions for ISG Accounting, page 2
• Information About ISG Accounting, page 2
• How to Configure ISG Accounting, page 4
• Configuration Examples for ISG Accounting, page 21
• Additional References, page 23
• Feature Information for ISG Accounting, page 24

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English