Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2009 Cisco Systems, Inc. All rights reserved.
Configuring ISG Access for PPP Sessions
First Published: March 20, 2006
Last Updated: March 2, 2009
Intelligent Services Gateway (ISG) is a Cisco IOS and Cisco IOS XE software feature set that provides
a structured framework in which edge devices can deliver flexible and scalable services to subscribers.
This document provides information about how to configure ISG access for PPP subscribers.
Finding Feature Information
For the latest feature information and caveats, see the release notes for your platform and software
release. To find information about the features documented in this module, and to see a list of the releases in
which each feature is supported, see the “Feature Information for ISG Access for PPP Sessions” section on
page 13.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS XE software
image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Prerequisites for ISG Access for PPP Sessions, page 2
• Restrictions for ISG Access for PPP Sessions, page 2
• Information About Configuring ISG Access for PPP Sessions, page 2
• How to Configure ISG Access for PPP Sessions Using Control Policies, page 4
• Configuration Examples for ISG Access for PPP Sessions, page 9
• Additional References, page 12
• Feature Information for ISG Access for PPP Sessions, page 13
To Next Page
Loading...
Need help?
General