Cisco IOS XE Intelligent Services User Manual

Service Gateway Interface
Configuration Examples for Service Gateway Interface
5
Step 4 test sgi xml filename
Verifies the format of an SGI XML request. The XML file must be copied to the router before it can be
used.
Configuration Examples for Service Gateway Interface
This section provides the following configuration examples:
• Configuring BEEP Listener Connection: Example, page 5
Configuring BEEP Listener Connection: Example
The following example shows how to configure the BEEP listener connection. The port number is set to
2089.
enable
configure terminal
sgi beep listener 2089
Additional References
Related Documents
MIBs
Related Topic Document Title
Overview of ISG Cisco IOS Intelligent Services Gateway Configuration Guide,
ISG commands Cisco IOS Intelligent Services Gateway Command Reference
MIB MIBs Link
• None To locate and download MIBs for selected platforms, Cisco IOS XE
releases, and feature sets, use Cisco MIB Locator found at the
following URL:
http://www.cisco.com/go/mibs

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English