Cisco IOS XE Intelligent Services User Manual

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
RADIUS-Based Policing
First Published: June 25, 2009
Last Updated: October 30, 2009
The RADIUS-Based Policing feature enables the router that is acting as the Intelligent Services Gateway
(ISG) to make automatic changes to the policing rate of specific sessions and services.
Finding Feature Information
For the latest feature information and caveats, see the release notes for your platform and software
release. To find information about the features documented in this module, and to see a list of the releases in
which each feature is supported, see the “Feature Information for RADIUS-Based Policing” section on
page 17.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS XE software
image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Restrictions for RADIUS-Based Policing, page 2
• Information About RADIUS-Based Policing, page 2
• How to Configure RADIUS-Based Policing, page 5
• Configuration Examples for RADIUS-Based Policing, page 10
• Verifying RADIUS-Based Policing, page 14
• Additional References, page 15
• Feature Information for RADIUS-Based Policing, page 17

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English