Configuring ISG Accounting
Configuration Examples for ISG Accounting
22
Cisco-AVpair = "traffic-class=input access-group 101 priority 20",
Cisco-AVpair = "traffic-class=output access-group 112 priority 20",
Cisco-Avpair = "accounting-list=remote-local",
Service-Info = "QU;8000",
Service-Info = "QD;64000"
Per-Service Accounting: Example
The following configuration example allows multiple services in a single Access-Accept message and
enables session accounting for the services. The example also enables RADIUS to authorize the
subscriber to access the services.
subscriber service multiple-accept
subscriber service session-accounting
subscriber authorization enable
vpdn enable
Per-Service Accounting on ISG: Example
The following example shows how to configure per-service accounting in a service policy map on the
ISG device:
class-map type traffic match-any classmap1
policy-map type service polmap1
class type traffic classmap1
accounting aaa list mlist1
ISG Postpaid Tariff Switching: Examples
The following example shows the configuration of a postpaid tariff switch each day of the week at
midnight:
Cisco-AVpair = "PPW00:00:00:127"
The following example shows the configuration of a postpaid tariff switch Monday through Friday at
8:00 p.m.:
Cisco-AVpair = "PPW20:00:00:31"
The following example shows the configuration of a postpaid tariff switch Monday through Friday at
6:00 a.m.:
Cisco-AVpair = "PPW06:00:00:31"
To Next Page
Loading...
Need help?
General