Configuring ISG Accounting
Feature Information for ISG Accounting
24
Feature Information for ISG Accounting
Table 1 lists the features in this module and provides links to specific configuration information. For
information on a feature in this technology that is not documented here, see the Cisco IOS XE Intelligent
Services Gateway Features Roadmap.
Use Cisco Feature Navigator to find information about platform support and software image support.
Cisco Feature Navigator enables you to determine which Cisco IOS XE software images support a
specific software release, feature set, or platform. To access Cisco Feature Navigator, go to
http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Note Table 1 lists only the Cisco IOS XE software release that introduced support for a given feature in a
given Cisco IOS XE software release train. Unless noted otherwise, subsequent releases of that
Cisco IOS XE software release train also support that feature.
Table 1 Feature Information for ISG Accounting
Feature Name Releases Feature Configuration Information
ISG: Accounting: Per Session, Service, and
Flow
Cisco IOS XE
Release 2.2
ISG accounting provides the means to bill for account or
service usage. ISG accounting uses the RADIUS protocol
to facilitate interaction between ISG and an external
RADIUS-based AAA or mediation server.
The following sections provide information about this
feature:
• Information About ISG Accounting, page 2
• How to Configure ISG Accounting, page 4
ISG: Accounting: Postpaid Cisco IOS XE
Release 2.2
ISG accounting provides the means to bill for account or
service usage. ISG sends accounting start and stop records
for sessions and services to an accounting server for
postpaid billing. The accounting server interprets the
records to generate bills.
The following sections provide information about this
feature:
• Information About ISG Accounting, page 2
• How to Configure ISG Accounting, page 4
To Next Page
Loading...
Need help?
General