8
• The WAN LED may be OFF. After configuration, it should come ON.
Antennas and Positions
Positions
The Router can be placed in three different positions: stackable, standalone, or wall-mount.
Standalone
1. Locate the Router’s left side panel.
2. The Router includes two stands. With the two large prongs facing outward, insert the short
prongs into the little slots in the Router, and push the stand upward until it snaps into place.
Wall-mount
You will need two suitable screws to mount the Router. Make sure the screw size can fit into
the crisscross wall-mount slots.
1. On the Wireless Router’s back panel are two crisscross wall-mount slots.
2. Determine where you want to mount the Wireless Router, and install two screws that are
2-9/16 in (64.5mm) apart.
3. Line up the Wireless Router so that the wall-mount slots line up with the two screws.
4. Place the wall-mount slots over the screws and slide the Wireless Router down until the
screws fit snugly into the wall-mount slots.
To Next Page
Loading...
Need help?
General
