83
Administration - Diagnostic
Figure 50: Diagnostic Screen
Ping Test Parameters
Ping Target IP
Enter the IP address or URL that you want to ping.
Ping Size
Enter the size of the packet you want to use.
Number of Pings
Enter the number of times you wish to ping the target device.
Ping Interval
Enter the time period (milliseconds) between each ping.
Ping Timeout
Enter the desired time period (milliseconds). If a response is not
received within the defined ping period, the ping is considered to
have failed.
Start Test
Click this button to begin the test. A new screen will appear and
display the test results.
Ping Result
Displays the Ping status.
Traceroute Test Parameters
Traceroute Target
Enter the target IP address for the traceroute test.
Start Test
Click this button to begin the test. A new screen will appear and
display the test results.
Cable Diagnostic
Port
Select the port number from the drop-down menu.
To Next Page
Loading...
Need help?
General
