37
Radius Server
Figure 22: Radius Server
Data - Radius Server Screen
RADIUS Server
Enter the server address here.
RADIUS Port
Enter the port number used for connections to the Radius Server.
Shared Key
Enter the shared key. Data is encrypted using a key derived from the
network key. Other Wireless Stations must use the same key. The
key must be from 8 to 63 characters in length.
Authentication
Type
Normally, this should be left at the default value of "Automatic". If
changed to "Open System" or "Shared Key", ensure that your
Wireless Stations use the same setting.
Encryption
Select the desired option, and ensure the Wireless Stations use the
same setting.
• 40/64-bit (10 Hex digits) - data is encrypted, using the default
key, before being transmitted. You must enter at least the de-
fault key. For 64 Bit Encryption, the key size is 10 chars in
HEX (0~9 and A~F).
• 104/128-bit (26 Hex digits) - data is encrypted, using the
default key, before being transmitted. You must enter at least
the default key. For 128 Bit Encryption, the key size is 26 chars
in HEX (0~9 and A~F).
Passphrase
If desired, you can generate a key from a phrase, instead of entering
the key value directly. Enter the desired phrase, and click the "Gen-
erate" button.
Key (1~4)
If you want to manually enter keys, then complete the fields pro-
vided. Each key can consist of the letters “A” through “F” and the
numbers “0” through “9”. It should be 10 characters in length for
64-bit encryption or 26 characters in length for 128-bit encryption.
To Next Page
Loading...
Need help?
General
