32
WEP
Figure 17: WEP
Data - WEP Screen
WEP Data Encryption
Authentication
Type
Normally, this should be left at the default value of "Automatic". If
changed to "Open System" or "Shared Key", ensure that your Wireless
Stations use the same setting.
WEP Data
Encryption
Select the desired option, and ensure the Wireless Stations use the
same setting.
• 40/64-bit (10 Hex digits) - data is encrypted, using the default
key, before being transmitted. You must enter at least the default
key. For 64 Bit Encryption, the key size is 10 chars in HEX (0~9
and A~F).
• 104/128-bit (26 Hex digits) - data is encrypted, using the default
key, before being transmitted. You must enter at least the default
key. For 128 Bit Encryption, the key size is 26 chars in HEX (0~9
and A~F).
Passphrase
If desired, you can generate a key from a phrase, instead of entering
the key value directly. Enter the desired phrase, and click the "Gener-
ate" button.
Key (1~4)
If you want to manually enter WEP keys, then complete the fields
provided. Each WEP key can consist of the letters “A” through “F”
and the numbers “0” through “9”. It should be 10 characters in length
for 64-bit encryption or 26 characters in length for 128-bit encryption.
TX Key
Select one of the keys to be used for data encryption (when you manu-
ally enter multiple WEP keys).
To Next Page
Loading...
Need help?
General
