51
Figure 30: Internet Access Policy Screen
On the List of PCs screen, you can define PCs by MAC Address or IP Address. You can also
enter a range of IP Addresses if you want this policy to affect a group of PCs.
To create an Internet Access policy:
1. Select the desired policy number from the Internet Access Policy drop-down menu.
2. Enter a Policy Name in the field provided.
3. To enable this policy, select the Enable option.
4. Click the Edit List of PCs button to select which PCs will be affected by the policy. The
List of PCs screen will appear in a sub-window. You can select a PC by MAC Address or
IP Address. You can also enter a range of IP Addresses if you want this policy to affect a
group of PCs. After making your changes, click the Save Settings button to apply your
changes.
5. Click the appropriate option, Deny or Allow, depending on whether you want to block or
allow Internet access for the PCs you listed on the List of PCs screen.
To Next Page
Loading...
Need help?
General
