Cisco SF352-08MP Administration Guide

Administration
Discovery - Bonjour
90 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
6
To view and modify routing resources:
STEP 1 Click Administration > Hardware Resources.
The following fields are displayed:
• Maximum IPv4 Policy Based Routes
- Use Default—Use default values.
- User Defined—Enter a value.
• Maximum IPv6 Policy Based Routes
- Use Default—Use default values.
- User Defined—Enter a value.
• Hardware Based Routing: Displays whether hardware-based routing is enabled or
suspended.
• Maximum VLAN Mapping Entries—Select one of the following options:
- Use Default—Use default values.
- User Defined—Enter a value.
STEP 2 Save the new settings by clicking Apply.
NOTE If hardware-based routing is not active, the Reactivate Hardware Based Routing button
appears. Click on this button to enable hardware-based routing. Activation of hardware-based
routing depends on the hardware resources that are available to support the current routing
configuration. If router resources are not sufficient to support device configuration, the
operation fails and an error message is displayed to the user.
Click on Hardware Resource Management to configure resources allocated to each type of
resource.
Discovery - Bonjour
See Bonjour.

Cisco SF352-08MP Specifications

General

Brand	Cisco
Model	SF352-08MP
Category	Switch
Language	English