Administration Settings
Switch Setting
Services Ready Platform SRP 500 Series Administration Guide 146
8
Switch Setting
On DSL models SRP 526W and SRP 527W, Ethernet port 4 can be configured as a
WAN port. You can also set the “jumbo mode” packet size on this screen.
NOTE When Ethernet port 4 is configured as a WAN port, the DSL port becomes inactive.
When the DSL port is active, the Ethernet port 4 operates only as a LAN port.
STEP 1 Click Administration on the tab and then click Switch Setting in the navigation
pane. The Switch Setting page appears.
STEP 2 Select Disable to configure Ethernet port 4 as a WAN port. Select Enable to enable
the DSL port.
STEP 3 Choose a Jumbo packet size.
STEP 4 Click Submit to save your settings.
To Next Page
Loading...
Need help?
General
