Setting up the Interfaces of the Services Ready Platform
Setting up the WAN Interface
45 Services Ready Platform SRP 500 Series Administration Guide
4
User name and
Password
Enter the strings that your ISP has instructed you to use.
The user name may be called a “username,” “login
name,” or “login.”
Connect on
Demand
Click this option if you want your broadband gateway to
connect to your ISP when a connection is needed, and
to disconnect when the line to your ISP has been idle for
a given amount of time. Connection and disconnection
are automatic. You can also adjust the maximum idle
time; the default setting is 20 minutes. The alternative to
Connect on Demand is Keep Alive (see next). In most
cases you can choose either option without consulting
your ISP.
Keep Alive Click this option if you want the gateway to maintain the
connnection to your ISP all the time. If the link goes
down for a given number of seconds (the “redial
period”), the gateway will automatically try to re-
establish it. The default redial period is 20 seconds.
Enable MTU/MRU
greater than 1492
Enable MTU/MRU greater than 1492.
Field Description
To Next Page
Loading...
Need help?
General
