Cisco TelePresence SX20 Codec User Manual

D14949.13 SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 109
Cisco TelePresence SX20 Codec API Reference Guide
xCommand Peripherals List
Lists all currently and previously connected peripherals.
Note: Does not apply for the Cisco PrecisionHD cameras.
Connected: Limit the search to currently connected devices.
Type: Limit the search by device type.
Requires user role: ADMIN
Parameters:
Connected: <False, True>
Type: <All, BluetoothHeadset, ControlSystem, ISDNLink, Other, TouchPanel>
Example:
xCommand Peripherals List Connected: True Type: Other
xCommand Peripherals ManualUpgrade
Manually upgrade software on a Precision 60 or a SpeakerTrack 60 camera.
Password: Enter a password, if one is needed to upload the software package.
Product: Define the device that will be upgraded.
URL: Define the URL from which to upload the software package.
Username: Enter a username, if one is needed to upload the software package.
Requires user role: ADMIN
Parameters:
Password: <S: 0, 64>
Product(r): <Precision 60 Camera, SpeakerTrack 60>
URL(r): <S: 0, 1024>
Username: <S: 0, 64>
Example:
xCommand Peripherals ManualUpgrade Product: Precision 60 Camera URL: “http://
softwareupload.company.com”
xCommand Peripherals Pairing DeviceDiscovery Start
Start device discovery to detect ISDN Links in the same network.
AutoPairing: You can select to automatically pair the detected device to the endpoint.
DeviceType: Only look for ISDN Link.
Timeout: Set a maximum time for the search from 3 to 60 seconds.
Requires user role: ADMIN
Parameters:
AutoPairing: <On, Off>
DeviceType: <ISDNLink>
Timeout: <3..60>
Example:
xCommand Peripherals Pairing DeviceDiscovery Start
xCommand Peripherals Pairing Pair
Pair an ISDN Link to an endpoint.
MacAddress: Enter the MAC address for the ISDN Link you wish to pair to the endpoint.
Requires user role: ADMIN
Parameters:
MacAddress(r): <S: 1, 1450>
Example:
xCommand Peripherals Pairing Pair MacAddress: 1.2.3.4
xCommand Peripherals Pairing Unpair
Unpair endpoint from an ISDN Link, when the two have contact.
MacAddress: Enter the MAC address for the ISDN Link you wish to unpair from the endpoint.
Requires user role: ADMIN
Parameters:
MacAddress(r): <S: 1, 100>
Example:
xCommand Peripherals Pairing Unpair MacAddress: 1.2.3.4
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand

Cisco TelePresence SX20 Codec Specifications

General

Brand	Cisco
Model	TelePresence SX20 Codec
Category	Conference System
Language	English