Cisco TelePresence SX20 Codec User Manual

D14949.13 SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 96
Cisco TelePresence SX20 Codec API Reference Guide
CallLog commands
xCommand CallLog Clear
Clear call logs stored in the system. If a logtag is given as argument, that specific call is deleted
from the logs. If no logtag is given the system deletes all call logs. The LogTag values for the calls
are found by issuing the xHistory CallLog Call command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Clear
xCommand CallLog Missed Delete
Delete the call log of missed calls. If a logtag is given as argument, that specific call is deleted from
the log. If no logtag is given the system deletes the complete missed calls log. The LogTag values
for missed calls are found by issuing the xHistory CallLog Missed command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Missed Delete LogTag:119
xCommand CallLog Missed Dismiss
Review the call log of dismissed calls. If a logtag is given as argument, that specific call is deleted
from the log. If no logtag is given the system deletes the complete missed calls log. The LogTag
values for missed calls are found by issuing the xHistory CallLog Missed command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Missed Dimissed LogTag:119
xCommand CallLog Outgoing Delete
Delete the call log of outgoing calls. If a logtag is given as argument, that specific call is deleted
from the log. If no logtag is given the system deletes the complete outgoing calls log. The LogTag
values for outgoing calls are found by issuing the xHistory CallLog Outgoing command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Outgoing Delete LogTag:202
xCommand CallLog Received Delete
Delete the call log of received calls. If a logtag is given as argument, that specific call is deleted
from the log. If no logtag is given the system deletes the complete received calls log. The LogTag
values for received calls are found by issuing the xHistory CallLog Received command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Received Delete LogTag:126
xCommand CallLog Recent Delete
Delete the call log of recent calls. If a logtag is given as argument, that specific call is deleted from
the log. If no logtag is given the system deletes all call logs. The LogTag values for recent calls are
found by issuing the xHistory CallLog Recent command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Recent Delete LogTag: 786
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand

Cisco TelePresence SX20 Codec Specifications

General

Brand	Cisco
Model	TelePresence SX20 Codec
Category	Conference System
Language	English