Cisco TelePresence SX20 Codec User Manual

D14949.13 SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 198
Cisco TelePresence SX20 Codec API Reference Guide
xStatus SystemUnit Diagnostics LastRun
Shows when the SystemUnit diagnostics was last run on the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics LastRun
*s SystemUnit Diagnostics LastRun: "2012-08-17, 16:23:27"
** end
xStatus SystemUnit Diagnostics Message [n] Type
Returns information on the results of the latest diagnostics on the system.
Value space of the result returned:
<CUCMVendorConfigurationFile/CallProtocolDualStackConfig/
CallProtocolIPStackPlatformCompatibility/CallProtocolVcsProvisioningCompatibility/
CameraPairing/CameraSoftwareVersion/CameraStatus/CamerasDetected/
DefaultCallProtocolRegistered/EthernetDuplexMatches/H320GatewayStatus/
H323GatekeeperStatus/HasValidReleaseKey/IPv4Assignment/IPv6Assignment/IPv6Mtu/
ISDNLinkCompatibility/ISDNLinkIpStack/NTPStatus/NetSpeedAutoNegotiated/OSDVideoOutput/
ProvisioningStatus/SIPEncryption/SIPListenPortAndOutboundMode/SIPProfileRegistration/
SIPProfileType/SelectedVideoInputSourceConnected/SipIceAndAnatConflict/
TLSVerifyRequiredCerts/TouchPanelConnection/TurnBandwidth/UdpPortRangeViolation/
ValidPasswords/VideoFromInternalCamera/VideoInputStability/TemperatureCheck>
Example:
xStatus SystemUnit Diagnostics Message type
*s SystemUnit Diagnostics Message 1 Type: InvalidAdminPassword
** end
xStatus SystemUnit Diagnostics Message [n] Level
Returns information on the level of the diagnostics message.
Error: There is an error in the system. The system can still be used, but there can be some
restrictions.
Warning: A problem is detected and a more specific report follows indicating the exact problem.
Critical: The warning level is critical. The system cannot be used.
Value space of the result returned:
<Error/Warning/Critical>
Example:
xStatus SystemUnit Diagnostics Message Level
*r Status (status=Error):
Reason: No match on address expression
XPath: Status/SystemUnit/Diagnostics/Message/Level
** end
xStatus SystemUnit Diagnostics Message [n] Description
A description of the current diagnostics alerts.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message Description
*s SystemUnit DiagnosticsResult Message 1 Description: "IP configuration
incomplete"
** end
xStatus SystemUnit Diagnostics Message [n] References
Additional information on the diagnostics alert, if available.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message References
*s SystemUnit DiagnosticsResult Message 1 References: ""
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX20 Codec Specifications

General

Brand	Cisco
Model	TelePresence SX20 Codec
Category	Conference System
Language	English