Cisco Telepresence System EX60 User Manual

65
D1501611 User Guide Cisco TelePresence
EX60 and EX90
Produced: December 2014 for TC7.3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
If you enable Auto Answer the
system will respond by itself to
incoming calls after a delay specied
by you. Note that an activated auto
answer may not provide you with
the privacy desired. In the example
shown here Auto Answer is set to
O.
On certain occasions you may have
to change the bandwidth (and
hence the quality) of the call. Some
congurations may have dierent
incoming and outgoing bandwidths
(typically ADSL connections), and
you may specify the default call rate
to ensure a stable video quality.
The default protocol may also be
specied. In the example shown, the
protocol has been set to SIP.
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
Settings
Administrator Settings—Call Details
About Call Details
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!

Cisco Telepresence System EX60 Specifications

General

Brand	Cisco
Model	Telepresence System EX60
Category	Conference System
Language	English