Cisco UCS B200 M3 User Manual

Cisco UCS B200 M3 Blade Server
SUPPLEMENTAL MATERIAL
57
In Figure 16, two ports from the VIC 1240 are channeled to 2208XP Fabric Extender A and two are
channeled to 2208XP Fabric Extender B. The VIC 1280 installed in the mezzanine slot also channels two
ports to each of the Fabric Extenders. The result is 40 Gbps of bandwidth to each Fabric Extender.
Figure 16 Option 2 - VIC 1240 and VIC 1280 to UCS 2208XP Fabric Extender
In Figure 17, two ports from the VIC 1240 are channeled to 2208XP Fabric Extender A and two are
channeled to 2208XP Fabric Extender B. The adapter installed in the mezzanine slot also channels one port
to each of the Fabric Extenders. The result is 30 Gbps of bandwidth to each Fabric Extender.
Figure 17 Option 3 - VIC 1240 and Emulex or QLogic I/O Adapter to UCS 2208XP Fabric Extender

Cisco UCS B200 M3 Specifications

General

System bus rate	8 GT/s
Processor family	Intel
Processor socket	LGA 2011 (Socket R)
Intel Xeon series	E5-2600
Motherboard chipset	Intel C600
Compatible processor series	Intel® Xeon®
Number of processors supported	2
ECC	Yes
Memory form factor	240-pin DIMM
Number of DIMM slots	24
Supported memory types	DDR3-SDRAM
Maximum internal memory	768 GB
RAID levels	0, 1
Storage drive sizes supported	2.5 \
Supported storage drive interfaces	Serial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity	0
On-board graphics card model	Matrox G200
Chassis type	-
Product color	Silver
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	5 - 93 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	620 mm
Width	203 mm
Height	50 mm
Weight	4360 g