Cisco WS-C2960-24TT-L User Manual

A-7
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-08
Appendix A System Messages
Error Message and Recovery Procedures
Error Message AAAA-3-NOSG: No server-group passed through parser.
Explanation An internal error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log.
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
CAPITOLA Messages
This section contains the Capitola internal module error messages.
Error Message CAPITOLA_MOD-3-APIBADVALUE:\n[chars]: Bad passed in value [chars] is
[dec].
Explanation
Error in initialization of port monitor subsystem.
Recommended Action Copy the error message exactly as it appears on the console or in the system log.
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message CAPITOLA_MOD-3-NULLPTR:\n[chars]: Did not expect NULL pointers.
Explanation
Derived pointers are NULL and could be from bad derivation values.
Recommended Action Copy the error message exactly as it appears on the console or in the system log.
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
CDP Messages
This section contains the Cisco Discovery Protocol error messages.
Error Message CDP-4-DUPLEX_MISMATCH: Duplex mismatch discovered on [chars]
([chars]), with [chars] [chars] ([chars]).
Explanation
CDP discovered a mismatch of duplex configuration.
Recommended Action Configure the interfaces to the same duplex (full or half).

Cisco WS-C2960-24TT-L Specifications

General

Brand	Cisco
Model	WS-C2960-24TT-L
Category	Switch
Language	English