Cisco XR 12000 Series Configuration Guide

Implementing Multicast Routing on Cisco IOS XR Software Cisco ASR 9000 Series Routers
How to Implement Multicast Routing
MCC-34
Multicast Configuration Guide
OL-
Calculating Rates per Route
This procedure enables multicast hardware forward-rate counters on a per-VRF-family basis.
SUMMARY STEPS
1. configure
2. multicast-routing [vrf vrf-name] [address-family {ipv4 | ipv6}]
3. rate-per-route
4. interface {type interface-path-id | all} enable
5. accounting per-prefix
6. end
or
commit
7. show mfib [vrf vrf-name] [ipv4 | ipv6] route [rate | statistics] [* | source-address] [group-address
[/prefix-length] [detail | old-output] | summary] [location node-id]
Step 12
clear pim [vrf vrf-name] [ipv4 | ipv6] bsr
Example:
RP/0/0/CPU0:router# clear pim bsr
(Optional) Clears BSR entries from the PIM RP group
mapping cache.
Step 13
show pim [vrf vrf-name] [ipv4 | ipv6] bsr
candidate-rp
Example:
RP/0/0/CPU0:router# show pim bsr candidate-rp
(Optional) Displays PIM candidate RP information for the
BSR.
Step 14
show pim [vrf vrf-name] [ipv4 | ipv6] bsr
election
Example:
RP/0/0/CPU0:router# show pim bsr election
(Optional) Displays PIM candidate election information for
the BSR.
Step 15
show pim [vrf vrf-name][ipv4 | ipv6] bsr
rp-cache
Example:
RP/0/0/CPU0:router# show pim bsr rp-cache
(Optional) Displays PIM RP cache information for the BSR.
Step 16
show pim [vrf vrf-name][ipv4 | ipv6] group-map
[ip-address-name] [info-source]
Example:
RP/0/0/CPU0:router# show pim ipv4 group-map
(Optional) Displays group-to-PIM mode mapping.
Command or Action Purpose

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English