Cisco XR 12000 Series Configuration Guide

Implementing Multicast Routing on Cisco IOS XR Software Cisco ASR 9000 Series Routers
Configuration Examples for Implementing Multicast Routing on Cisco IOS XR Software
MCC-84
Multicast Configuration Guide
OL-
rp-address ::192:168:10:1
!
router pim vrf default address-family ipv4
rp-address 1.1.1.1
!
end
CE2:
For information about configuring the CE router, using Cisco IOS software, see the appropriate Cisco
IOS software documentation.
!
interface Loopback0
ipv4 address 122.122.122.122 255.255.255.255
!
interface GigabitEthernet0/5/0/0
ipv6 address 2013::80:1:1:2/126
!
interface GigabitEthernet0/5/0/1
ipv6 address 2013::122:1:1:2/96
!
multicast-routing
address-family ipv6
interface all enable
!
!
route-policy pass-all
pass
end-policy
!
router eigrp 2
address-family ipv6
router-id 122.122.122.122
default-metric 1000 100 250 100 1000
redistribute connected
interface GigabitEthernet0/5/0/1
!
!
!
router pim vrf default address-family ipv6
dr-priority 2
rp-address ::192:168:10:1
!
end
Configuring an IPv6 Multicast VPN to Advertise Routes Between the PE to CE with BGP as the
Protocol: Example
CE1:
For information about configuring the CE router, using Cisco IOS software, see the appropriate Cisco
IOS software documentation.
!
interface Loopback0
ipv4 address 101.101.101.101 255.255.255.255
!
interface GigabitEthernet0/5/0/0
ipv6 address 2013::90:1:1:2/126
!

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English