Citizen CL-E321 User Manual

70
——
7. Conguring the Printer Using the
Operation Panel
The following operations can be performed from the control panel after changing the
printer operation mode to the special mode.
 Adjust media sensors
 Print test samples
 Print the settings conguration
 Change emulation modes
 HEX dump mode
 Initialize the printer
*This device is not equipped with the [Menu Conguration Mode] featured in other
models.
1. With the top cover closed, turn on the power to the printer while pressing and holding
the FEED key.
The printer changes to the special mode.
The buzzer emits 3 short tones and the status LED ashes alternately in green and red.
2. Press the FEED key to select the desired operation mode.
Mode Buzzer Status LED
Color Interval
Special function mode 3 short tones Alternately in green and
red
Flashes quickly
Press the FEED key ↓
Sensor Adjustment Mode 1 short tones Green Flashes
Press the FEED key ↓
Test print mode 2 short tones Green Flashes quickly
Press the FEED key ↓
Conguration print mode 3 short tones Amber Flashes
Press the FEED key ↓

Citizen CL-E321 Specifications

General

Brand	Citizen
Model	CL-E321
Category	Printer
Language	English