— 14 —
2.2 Paper Cover Inside
● Paper feed roller
Feeds paper as part of print mechanism.
● Paper-near-end sensor
Changes the setting in accordance with the inner diameter of paper roll or
setting status.
● Auto cutter
Cuts the paper with a command at the end of printing. Cutting method is
selectable between partial cut and full cut with a command.
● Print (thermal) head
Prints characters and/or graphic data on thermal paper.
● Paper-end sensor
Stops printing when this sensor detects paper end.
2.3 Other Built-in Functions
● Buzzer
This printer has a built-in buzzer. It is operated in case of an error, operation,
or by a command.
● User memory
Allows registration of user-defined characters and logo data on the nonvolatile
memory. Data registered remains even after the printer power is off.
● Memory switch
Setting of various kinds of functions can be registered on nonvolatile memory.
The setting registered is valid even if the printer power is turned off. In
additional memory switch setting can be changed by manual operation.
Paper feed roller
Paper-end sensor
Auto cutter
Print (thermal)
head
Paper-near-end sensor
To Next Page
Loading...
Need help?
General
Weight and Dimensions
