NX501/NZ501 English 76
Button Description
Settings related to guidance on the map screen can be adjusted here.
Display related settings.
These settings allow you to customize the application for your local language,
measurement units, time and date settings and formats, as well as to choose the
time zone.
Trip logs and track logs contain useful information about your trips. Trip logs can
be saved manually when you reach your destination or you can turn on the
automatic saving here.
Modify the basic software parameters set during the initial setup process. For
details, see page 7.
Delete all saved data and reset all settings to their factory defaults.
4.3.1 Sound and Warnings
Button Description
Tap this button to adjust the volume of the different sounds in the application. A
new screen shows the different sound types and their controls. See below for
details.
This button shows the current voice guidance profile. By tapping the button, you
can select a new profile from the list of available languages and speakers. Tap
any of these to hear a sample voice prompt. Just tap
when
you have selected the new spoken language.
Maps may contain information about the speed limits of the road segments.
Clarion Mobile Map is able to warn you if you exceed the current limit. This
information may not be available for your region (ask your local dealer), or may
not be fully correct for all roads in the map. This setting lets you decide whether
you wish to receive visible and/or audible warnings.
djust the slider to set the relative speed above which the application initiates the
warning.
The following alert types are available:
x Audio warning: you receive a verbal warning when you exceed the speed
limit with the given percentage.
x Visual warning: the current speed limit is shown on the map when you
exceed it.
If you prefer to see the speed limit sign on the map all the time (normally it is
shown only if your speed exceeds it), you can set it here.
To Next Page
Loading...
Need help?
General
