To Next Page

To Previous Page

IGS-NT Communication Guide

Table of contents

1 Document information 7

1.1 Clarification of notation 7

1.2 About this guide 7

1.3 Legal notice 7

1.4 Document history 9

1.5 Definition of terms 9

2 Controllers communication capabilities 11

2.1 IG/IS/IM-NTC-BB - Communications 12

2.2 IG/IS/IM-NTC-BB - Terminals 13

2.3 IG/IS/IM-NTC-BB - Peripheral modules 14

2.4 IG/IS/IM-NTC-BB - Jumpers settings 15

2.5 IG/IM-NT-BB - Communication 16

2.6 IG/IM-NT-BB - Terminal 17

2.7 IG/IM-NT-BB - Peripheral modules 18

2.8 IG/IM-NT-BB - Jumper settings 19

2.9 IG-NT - Communications, Terminals 20

2.10 IG-NTC - Communication, Terminals 21

2.11 IM-NT - Communications, Terminals 22

2.12 IS-NT-BB - Communications, Terminals 23

3 Applications overview 24

3.1 Direct PC connection to Single gen-set 24

3.1.1 RS232 connection 24

3.1.2 USB connection 25

3.1.3 RS485 connection 26

3.1.4 Ethernet connection (Direct) 27

3.2 Direct PC connection to Multiple gen-sets 29

3.2.1 RS485 connection 29

3.2.2 RS232/485 connection (I-LB+) 31

3.2.3 USB connection via I-LB+ module 32

3.2.4 Ethernet connection via IB-NT 34

3.2.5 Ethernet connection (Direct) 35

3.3 Monitoring Local on site - MODBUS 36

3.3.1 RS232 ModBus 36

3.3.2 RS485 ModBus 38

3.3.3 Ethernet - MODBUS/TCP (Direct) 39

ComAp InteliGen NT Communications Guide

Other manuals for ComAp InteliGen NT