Name: CommScope CAP MX Series
Brand: CommScope
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CommScope Era

™

Fiber Low Power Carrier Access Point Installation Guide M0201ANC_uc

Page 58 © June 2019 CommScope, Inc.

Connect the Cables to the Fiber CAP L

4 Use a lint-free wipe drenched with isopropyl alcohol to clean the

connector winding.

5 Use a cotton bud drenched with isopropyl alcohol to clean the lip

of the inner ring.

6 Use a cotton bud drenched with isopropyl alcohol to clean the

inside surface of the inner ring.

7 Use a cotton bud drenched with isopropyl alcohol to clean the

inside of the center conductor spring tines.

8 Remove the protective caps from the unit connector, and then

clean it the same way that you cleaned the cable connector.

Questions and Answers:

Need help?

Do you have a question about the CommScope CAP MX Series and is the answer not in the manual?

CommScope CAP MX Series Specifications

General