Name: CommScope CAP MX Series
Brand: CommScope
Rating: 4 (1 reviews)

To Next Page

To Previous Page

M0201ANC_uc CommScope Era

™

Fiber Low Power Carrier Access Point Installation Guide

Connect the Cables to the Fiber CAP L

Clean the RF Cable Connectors

This section tells you how to clean RF cable connectors. The graphics in this section illustrate the cleaning

procedure and do not show the CAP M.

This procedure requires the use of compressed air. Wear protective clothing—especially protective

glasses—to protect against injury from flying particles.

This procedure requires the use of flammable material. There is a risk of fire. Keep away from sources of

ignition.

This procedure requires the use of eye irritant product. There is a risk of eye irritation. Avoid contact with

eyes and skin. Wear protective clothing—especially protective glasses.

Do the following to clean the RF cable connector

1 Gather the following cleaning tools:

• Isopropyl alcohol

• Compressed air

• Lint-free wipe

• Cotton buds.

2 Remove the protective cap from the RF connector.

3 Use compressed air to remove metal chips and small particles

from the mating and inner surfaces of the connector.

Questions and Answers:

Need help?

Do you have a question about the CommScope CAP MX Series and is the answer not in the manual?

CommScope CAP MX Series Specifications

General