Displays error 9 messages in new format: PAUSE flashes in the kg
display and the error 9 type is shown in the unit price display.
Self checking for Error 9 faults while dispenser is idle. Displays
message if fault occurs and clears message 10 seconds after fault
clears.
During fill if error 9 fault occurs the fill will stop and the error 9
message displayed for at least 120 seconds. If fault is cleared the
display will continue for another 10 seconds.
If the dispenser is re-powered after an error 9 fault, the message will
show for 10 seconds after the start up PAUSE message.
When using the parameter switch, the hose number (PN) display has
been modified to also display a count of the total error 9 faults in the
unit shown in the price display. Refer Parameter Switch (see page 19)
In the same mode, the display will also flash in the price/kg screen, the
last recorded reason for the end of sale and the last recorded error 9.
Removing the decimal place from the totes screen
Quick view of totes by rapidly pressing the start button three times
Modification of error 9 codes to improve diagnostics
Changed sequencing rates
Sequencing triggered by minimum flow rates
Error 7 message changed to read Er Flo in totes screen
End of sale reason flashed in unit price display at end of sale