Compac CNG User Manual

Attaching the High Mast (Laser Only)
Mechanical Installation
Compac Industries Ltd.
Page 14
www.compacngv.com
Attaching the High Mast (Laser Only)
All high masts come pre-assembled with the dispenser and simply require
connection.
To attach the high mast:
1. Remove the stainless steel screws from the side of the dispenser.
2. Attach the mast using the screws, as pictured below.
The high mast gasket and stainless steel screws are fitted
to the dispenser in the factory.
High mast assembly
complete with
bracket
High mast gasket
Side of display cabinet
High mast
reinforcing bracket
3 x M8 x 30 stainless steel
socket head screw
(6 mm Allen or Hex
key required for installation)
3 x M8 x 30 stainless steel
socket head screw
(6 mm Allen or Hex
key required for installation)
3 x M8 spring washers
3 x M8 flat washers

Compac CNG Specifications

General

Brand	Compac
Model	CNG
Category	Dispenser
Language	English