EasyManuals Logo
Home>Compac>Dispenser>CNG

Compac CNG User Manual

Default Icon
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Parameter Switch
Dispenser Set-up
Compac Industries Ltd.
Page 24
www.compacngv.com
Dispenser Passcode
The dispenser passcode (Code and PASS) enables you to limit the
access to sensitive settings found under the parameter and K-factor
switches.
If set, only the dispenser software version can be viewed.
If the dispenser is connected to the forecourt PC, you can
access the dispenser information via the Compac Dispenser Monitor
program, even if the dispenser is passcode is enabled.
To Set the Dispenser Passcode
1. Make sure that the dispenser is idle, with the nozzle in its holster.
2. Press and release the Parameter switch until Code is displayed.
3. Enter the new passcode.
Each press of the Parameter switch passes you over a
digit in a setting, making the digit blink. Holding the switch down for
more than a second changes whichever digit is currently displayed. If
you want to pass over a setting without changing any digits, keep
pressing and releasing the switch.
4. Let the menu time out so that the value and quantity amounts are
displayed.
The dispenser is now passcode protected. Store the passcode in a secure
place.
To Disable the Dispenser Passcode
1. Make sure that the dispenser is idle, with the nozzle in its holster.
2. Press and release the Parameter switch until PASS is displayed.
3. Enter the current password.
Each press of the Parameter switch passes you over a
digit in a setting, making the digit blink. Holding the switch down for
more than a second changes whichever digit is currently displayed. If
you want to pass over a setting without changing any digits, keep
pressing and releasing the switch.
4. Press and release the Parameter switch until Code is displayed.
5. Clear the password by setting it to 000000.
Each press of the Parameter switch passes you over a
digit in a setting, making the digit blink. Holding the switch down for
more than a second changes whichever digit is currently displayed. If
you want to pass over a setting without changing any digits, keep
pressing and releasing the switch.
6. Let the menu time out so that the value and quantity amounts are
displayed.
The dispenser passcode is now disabled.

Table of Contents

Other manuals for Compac CNG

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compac CNG and is the answer not in the manual?

Compac CNG Specifications

General IconGeneral
BrandCompac
ModelCNG
CategoryDispenser
LanguageEnglish

Related product manuals