11.2 Checklist: Safety devices and warnings
Safety devices
Inspect the following safety devices. Check the box to confirm that the corresponding safety device is
fitted and working properly.
Safety device Fitted / Working
properly
Cover is fitted
Operating panel is fitted
Appliance door has no scratches, cracks or dents
Venting position of appliance door is working (for table-top units)
Suction panel in place and properly secured
Magnetic door switch: electric door sensor for appliance door is working
Disconnection device working properly
Gas shut-off device working properly
Retaining device for stand on castors for restricting the range of movement
Warning signs
Check the warning signs. Check the box to confirm that the warning signs are fitted.
Warning signs on the combi oven Fitted
'Position and description of the warning signs on table-top units' on page 23
'Position and description of the warning signs on floor-standing units' on page 25
11 Checklists and completion of installation
187
To Next Page
Loading...
Need help?
General
