47
Working with the Pictogram Control (Option)
The CONVOTHERM offers you the possibility of
assigning recipes stored in the cookbook to
pictogram keys. The assigned recipe can be started
at any time via the pictogram key.
Assigning a recipe to a pictogram key
1. Press key R The stored recipes appear on
the display. Select the desired recipe with the
dial.
2. Press the desired pictogram key for three
seconds.
3. When the acoustic signal sounds, the recipe has
been assigned to the selected pictogram key.
Note
■ If the desired pictogram key is already assigned
the stored recipe can be overwritten. Select the
desired recipe and press the pictogram key for
five seconds.
When the acoustic signal sounds, the recipe
has been assigned to the selected pictogram
key.
Starting a recipe with pictogram key
1. Press the pictogram key R The CONVOTHERM
performs the selected recipe. The recipe name,
the current cooking step and the number of
cooking steps appear at the top of the display.
The time and temperature values appear at the
bottom as usual.
2. At the end of the cooking time or when the core
temperatures is reached, the buzzer sounds and
the recipe is terminated. Press key or open
the door.
OSP/OSG
CONVOTHERM cookbook
Mr.C recommends:
■ You can work easily and quickly using the
pictogram keys as no settings have to be
made.
■ The pictogram keys are particularly suitable for
products which you prepare regularly, such as
baking of pretzels, bread rolls and croissants.
You can then have these produced in excellent
quality by trained personnel.
■ By barring the control panel when working
with the pictogram keys you also gain a higher
production reliability because the personnel
cannot manipulate settings.
■ If you assign the preheating programme
to a pictogram key, you can preheat the
CONVOTHERM quickly and easily for the
production of meals.
To Next Page
Loading...
Need help?
General
