Craftsman 113.197250 User Manual

The following loose parts are included with
model 113.197250:
BX
CD
BG Leveling Feet .................... 4
BH Hex Nuts 3/8-16 ................. 8
BJ Truss Head Bolts 1/4-20 x 1/2 .... 32
BK Lockwashers 1/4 ................ 32
BL Hex Nuts 1/4-20 ................ 32
BM Hex Hd. Screw 5/16-18 x 3/4 ...... 4
BN Washer 11/32 x 7/8 x 1/16 ........ 4
BO Lockwasher 5/16 ................ 4
BP Hex Nut 5/16-18 ................. 4
BQ Pan Hd. Screw 1/4-20 x 1 ......... 4
BR Washer 17/64 x 5/8 x 1/32 ........ 5
BS Lockwasher 1/4 ................. 4
BT Hex Nut 1/4-20 .................. 4
BU Table Clamp .................... 2
BV Tee Nut ........................ 1
BW Cup Point Set Screw 1/4-20 x 7/8 .. 1
BX Pan Hd. Screw Ty T
1/4-20 x 1-3/4 ................. 1
BY "U" Clip 1/4-20 ................ 1
BZ Yoke Plug ...................... 1
CA Switch Key ..................... 1
CB Battery ......................... 1
CC Pan Hd. Screw 10-32 x 1/2 ........ 1
CD External Lockwasher #10 ......... 1
CE BatteD' Cover ................... 1
CF Handwheel ..................... 1
CG Arbor Wrench .................. 2
CH Bracket, Leg ....................... 4
CI Hex Bushing ....................... 1
BG
10
BY
CE
CG
CB
cc
CH
Information
BOTH MODELS
Cl
1. If you are missing any part while putting
your saw together, do not continue assembly.
Contact your Sears Service Center or Retail
Store and get the missing part before continu-
ing assembly or trying to use the saw.
Complete parts lists are located at the end of
this manual. Use these lists to identify the
number of any missing part.
2. Sometimes small parts get lost in packag-
ing materials. Do not throw away any pack-
aging until your saw is put together. If you
are missing a part, check the packaging be-
fore contacting Sears.
3. Most parts of your radial arm saw will be
fastened together using truss head bolts, lock-
washers, and hex nuts of the sizes shown.
(Figure 13) When different sizes are needed,
the instructions will include a sketch to help
you locate the correct size.
Fig. t3 - Truss Head Bolt, Lockwasher, Hex Nut

Craftsman 113.197250 Specifications

General

Brand	Craftsman
Model	113.197250
Category	Saw
Language	English