Handwheel
The handwheel controls the height of the
radial arm.
To raise the radial arm, turn the handwheel
clockwise. To lower the radial arm, turn the
handwheel counterclockwise. (Figure 55)
Fig. 55 - Handwheet
One complete turn of the handwheel moves
the arm !/16 inch.
The handle can be folded in by squeezing the
red plastic "ears" with your thumb and index
finger while pushing the handle in.
All Controls
Always lock the miter, swivel and bevel locks
before making a cut on your radial arm saw.
When ripping, the rip lock must also be lock-
ed. When crosscutting, the rip lock should be
locked before and after each cut, when the
saw is in the rearmost position.
23
To Next Page
Loading...
Need help?
General