Crestron Mercury CCS-UC-1 Do Guide

Supplemental Guide – DOC. 7844E CCS-UC-1: Crestron Mercury Tabletop Conference System • 67
Appendix: Configure Exchange for Use with CCS-UC-1
Skype for Business can provide single touch join functionality on its client devices. The
image below shows a reserved Skype for Business meeting where the CCS-UC-1 is able to
read the join information from the body of the scheduling service. Tapping
JOIN SKYPE
®
MEETING causes the CCS-UC-1 to join the Skype for Business call.
For information on supported versions of Skype for Business and Exchange, refer to Answer
ID 5829 in the Online Help on the Crestron website (www.crestron.com/onlinehelp
).
Home Screen - Reserved Room
There are several reasons this The JOIN SKYPE
®
MEETING button may not display:
• The calendar body is not available to the CCS-UC-1
• The CCS-UC-1 is not logged in to Skype for Business
• The meeting was not scheduled as a Skype for Business meeting
• The join information in the body of the scheduled meeting was not available to the
CCS-UC-1
Enable Resource Account Body for One Touch Join
By default, resource accounts do not include a body for their invitations. To have resource
accounts that are used with the CCS-UC-1 include a body in their invitations, perform the
following procedure below.
NOTE: Change data within the chevrons before executing commands.
NOTE: Both on-premises and Office 365 (O365) deployments are affected.
1. Access PowerShell on the domain and enter the following command for the
account.
Set-CalendarProcessing <account name> –DeleteComments
$false –DeleteSubject $false

Crestron Mercury CCS-UC-1 Specifications

General

Brand	Crestron
Model	Mercury CCS-UC-1
Category	Conference System
Language	English