Crestron TSR-310 Supplemental Guide

2 • TSR-310: Handheld Touch Screen Remote Supplemental Guide – DOC. 8226D
Commission the TSR-310
If the TSR-310 ships with Performance UI mode enabled by default, the following screen
is displayed once the TSR-310 wakes from low power mode (after power is applied for
the first time). For more information on powering the device, refer to the TSR-310 Quick
Start (Doc. 8225).
Wi-Fi Connection Screen
NOTE: For older TSR-310 devices that did not ship with Performance UI mode enabled
by default, Performance UI mode can be enabled manually through
Crestron Toolbox™ software after upgrading the device to the latest firmware. For more
information, refer to the Performance UI for TSR-310 Operations Guide (Doc. 8410).
Tap SETUP to enter the device setup screens and to connect the TSR-310 to a Wi-Fi
network.
• For more information on the device setup screens, refer to "Access the Setup
Screens" on page 4.
• For more information on connecting to a Wi-Fi network, refer to "Select an
Access Point" on page 8.
Once the TSR-310 is connected to a valid Wi-Fi network, the following screen displayed
after exiting the setup screens.

Crestron TSR-310 Specifications

General

Brand	Crestron
Model	TSR-310
Category	Remote Control
Language	English