D-Link DAP-2660 User Manual
21
Access Point Mode (5GHz)
Wireless Band:
Mode:
Network Name (SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Captive Prole:
Select the wireless band used here. Options
to choose from are 2.4 GHz and 5 GHz. In this
section we’ll explain the 5GHz wireless band.
Select wireless mode used here. Options to
choose from are Access Point, WDS with AP,
WDS, and Wireless Client. In this section we’ll
explain the Access Point wireless mode.
Enter the Service Set IDentier (SSID) used here.
This name is designated for a specic Wireless
Local Area Network (WLAN). By default, the SSID is
dlink. The SSID can be easily changed to connect
to an existing wireless network or to establish a
new wireless network. The SSID can be up to 32
characters and is case-sensitive.
Select Enable to broadcast the SSID across the
network, thus making it visible to all network
users. Select Disable to hide the SSID from the
network.
Select to Enable or Disable the auto-channel selection feature here. When enabled, the access point automatically selects the
channel that provides the best wireless performance. The channel selection process only occurs when the AP is booting up. To
manually select a channel, set this option to Disable and select a channel from the drop-down menu.
To change the channel, rst toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make
the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
Select the wireless channel width option here. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz
and Auto 20/40/80 MHz allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless devices on your network.
Select to Enable or Disable the captive prole feature here.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
