D-Link DAP-2660 User Manual
46
Multi-SSID (2.4GHz)
The device supports up to four multiple Service Set Identiers. You can set the Primary SSID in the Basic > Wireless section. The SSID’s factory
default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.
Enable Multi-SSID:
Enable Priority:
Band:
Index:
SSID:
SSID Visibility:
Security:
Select the checkbox to enable the multiple SSID
feature.
Select the checkbox to enable the priority option.
Select the wireless band used here. Options
to choose from are 2.4 GHz and 5 GHz. In this
section we’ll explain the 2.4GHz wireless band.
Select the SSID index value here. The Primary SSID
cannot be modied here. After selecting multiple
SSIDs 1 to 7, their respective parameters can be
congured.
Enter a unique SSID name for each multiple SSID
in the space provided.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Select the wireless security method to use for the
specied multiple SSID here. For multiple SSIDs, the
following wireless security methods are supported:
Open System, WPA-Personal, WPA Enterprise
and 802.1X.
For more information about the wireless security,
refer to page 14.