EasyManuals Logo
Home>D-Link>Wireless Access Point>DAP-2660

D-Link DAP-2660 User Manual

D-Link DAP-2660
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
D-Link DAP-2660 User Manual
73
DHCP Server
The DHCP address pool denes the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless
stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2660 is capable of acting as a DHCP
server.
Function Enable/
Disable:
IP Assigned From:
The Range of Pool (1-
254):
Subnet Mask:
Gateway:
WINS:
DNS:
Domain Name:
Lease Time:
Dynamic Host Configuration Protocol (DHCP)
assigns dynamic IP addresses to devices on
the network. This protocol simplies network
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-2660 to function
as a DHCP server.
Input the rst IP address available for assignment
on your network.
Enter the number of IP addresses available for
assignment. IP addresses are increments of the IP
address specied in the “IP Assigned From eld.
All devices in the network must have the same
subnet mask to communicate. Enter the subnet
mask for the network here.
Dynamic Pool Settings
Enter the IP address of the gateway on the network.
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer that has a dynamically assigned IP address.
Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as www.
dlink.com into IP addresses.
Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.)
The lease time is the period of time before the DHCP server will assign new IP addresses.

Table of Contents

Other manuals for D-Link DAP-2660

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DAP-2660 and is the answer not in the manual?

D-Link DAP-2660 Specifications

General IconGeneral
2.4 GHzYes
ModulationPSK
Frequency band2.4, 5 GHz
Number of users- user(s)
Channels quantity- channels
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u
Maximum data transfer rate1200 Mbit/s
InternalNo
CertificationFCC\\r IC\\r CE\\r UL
Security featuresNetwork access point (NAP)
Security algorithms64-bit WEP, 128-bit WEP, 802.1x RADIUS, SSID, WPA, WPA2
Antenna featuresIntegrated antenna
Antennas quantity4
Antenna gain level (max)4 dBi
Power consumption (typical)11 W
Storage temperature (T-T)-20 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Package depth269 mm
Package width204 mm
Package height64 mm
Package weight562.5 g
Pallet width1200 mm
Pallet length1100 mm
Pallet height (air)2047 mm
Pallet gross weight (air)439460 g
Quantity per pallet (air)480 pc(s)
Shipping (inner) case width290 mm
Shipping (inner) case height239 mm
Shipping (inner) case length352 mm
Shipping (inner) case weight4385 g
Shipping (inner) case net weight2230 g
Number of cartons per pallet (air)96 pc(s)
Quantity per shipping (inner) case5 pc(s)
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Width170 mm
Height28 mm
Weight316 g

Related product manuals