D-Link DAP-2660 User Manual
76
Filters
This page allows the user to congure Wireless MAC ACL settings for access control. Click the Save button to accept the changes made.
Wireless Band:
Access Control List:
MAC Address:
MAC Address List:
Current Client
Information:
Upload ACL File:
Load ACL File to Local
Hard Drive:
Select the wireless band used here. Options to
choose from are 2.4 GHz and 5 GHz.
Select Disable to disable the lters function.
Select Accept to accept only those devices with
MAC addresses in the Access Control List. All other
devices not on the list will be rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other
devices not on the list will be accepted.
Enter each MAC address that you wish to include
in your lter list, and click Apply.
When you enter a MAC address, it appears in this
list. Highlight a MAC address and click Delete to
remove it from this list.
This table displays information about all the
current connected stations.
Wireless MAC ACL
Here users can upload a pre-congured wireless MAC ACL settings conguration le to the access point which will overwrite
the current wireless MAC ACL settings. Click the Browse button to navigate to the conguation le, located on the local PC,
and then click the Upload button to initiate the upload.
Here users can download the current wireless MAC ACL settings, in a conguration le, to the local PC, that serves as a backup
when needed. Click the Download button and navigate to the destination where the le can be saved on the local PC.