D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
45
Select to Enable or Disable the connection limit feature here. This is an option for load balancing and
determines whether to limit the number of users accessing this device. The exact number is entered in the
User Limit eld below. This feature allows the user to share the wireless network trafc and the client using
multiple APs. If this function is enabled and when the number of users exceeds this value, or the network
utilization of this AP exceeds the percentage that has been specied, the DAP-2660 will not allow clients to
associate with the AP.
Enter the maximum amount of users that are allowed access (0 to 64 users) to the device using the specied wireless
band. The default setting is 20.
Use the drop-down menu to Enable or Disable the 11n Preferred function. The wireless clients with 802.11n protocol
will have higher priority to connect to the device.
Set the maximum utilization of this access point for service. The DAP-2660 will not allow any new clients to associate
with the AP if the utilization exceeds the value the user species. Select a utilization percentage between 100%, 80%,
60%, 40%, 20%, or 0%. When this network utilization threshold is reached, the device will pause one minute to allow
network congestion to dissipate.
Use the drop-down menu to select the criteria of disconnecting the wireless clients. Available options are RSSI and
Data Rate.
When RSSI is selected in the Aging Out drop-down menu, select the percentage of RSSI here. When the RSSI of
wireless clients is lower than the specied percentage, the device disconnects the wireless clients.
When Data Rate is selected in the Aging Out drop-down menu, select the threshold of data rate here. When the data
rate of wireless clients is lower than the specied number, the device disconnects the wireless clients.
Select to Enable or Disable the ACL RSSI feature here. When enabled, the device denies the connection request from
the wireless clients with the RSSI lower than the specied threshold below.
Set the ACL RSSI threshold percentage.
Connection Limit:
User Limit (0-64):
11n Prefered:
Network Utilization:
Aging Out:
RSSI Threshold:
Data Rate Threshold:
ACL RSSI:
ACL RSSI Threshold:

D-Link DAP-2660 Specifications

General

2.4 GHz	Yes
Modulation	PSK
Frequency band	2.4, 5 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u
Maximum data transfer rate	1200 Mbit/s
Internal	No
Certification	FCC\\r IC\\r CE\\r UL
Security features	Network access point (NAP)
Security algorithms	64-bit WEP, 128-bit WEP, 802.1x RADIUS, SSID, WPA, WPA2
Antenna features	Integrated antenna
Antennas quantity	4
Antenna gain level (max)	4 dBi
Power consumption (typical)	11 W
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Package depth	269 mm
Package width	204 mm
Package height	64 mm
Package weight	562.5 g
Pallet width	1200 mm
Pallet length	1100 mm
Pallet height (air)	2047 mm
Pallet gross weight (air)	439460 g
Quantity per pallet (air)	480 pc(s)
Shipping (inner) case width	290 mm
Shipping (inner) case height	239 mm
Shipping (inner) case length	352 mm
Shipping (inner) case weight	4385 g
Shipping (inner) case net weight	2230 g
Number of cartons per pallet (air)	96 pc(s)
Quantity per shipping (inner) case	5 pc(s)
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	170 mm
Height	28 mm
Weight	316 g