DGS-1520 Series Gigabit Ethernet Smart Managed Switch Hardware Installation Guide
1
1. Introduction
Switch Description
Package Contents
Switch Description
The DGS-1520 series is the latest next generation of Smart Managed switches from D-Link. Switches in this series
feature a wide selection of different ports types and speeds that can be used to interconnect a variety of networking
devices to communicate with each other. The SFP+ ports, with fiber-optical cabling, can be used to uplink connections
that may span over great distances. Switches in this series also implement D-Link’s innovative third generation Green
Ethernet technology (IEEE 802.3az) to save power from links that are inactive by turning LEDs off based on a
customized schedule and by allowing ports to enter a hibernated state automatically.
In the DGS-1520 Series, the following switches are available: DGS-1520-28, DGS-1520-28MP, DGS-1520-52, and
DGS-1520-52MP. Some features, throughout this guide, will apply to all the switches within the DGS-1520 Series.
When referring to these universal features, we will simply refer to the product as the Switch.
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following
items:
• One DGS-1520 series switch
• One AC power cord
• One AC power cord retainer set
• One console cable (RJ45 to RS-232)
• Four rubber feet with adhesive backing
• One rack mounting kit, containing two brackets and a number of screws
• One quick installation guide
NOTE: If any item is missing or damaged, please contact your local D-Link reseller for replacement.
To Next Page
Loading...
Need help?
General