D-Link DIR-400 User Manual

73D-Link DIR-400 User Manual
Section 5 - Connecting to a Wireless Network
Connecting to a Wireless Network
Using Windows
®
XP
Windows
®
XP users may use XP’s built-in wireless utility (Zero Conguration Utility). The following instructions are
for Service Pack 2 users. If you are using another utility or Windows
®
2000, please refer to the user manual of your
wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to
the Windows
®
XP utility as seen below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet,
check your TCP/IP settings for your wireless adapter. Refer
to the Networking Basics section in this manual for more
information.

D-Link DIR-400 Specifications

General

Brand	D-Link
Model	DIR-400
Category	Wireless Router
Language	English