D-Link DSL-520B User Manual

47D-Link DSL-520B ADSL2+ Modem User Manual
Section 7 - Device Info
Incoming
Click Security > IP Filtering > Incoming.
Bydefault,allincomingIPtracfromtheWANisblockedwhentherewallisenabled.However,someIPtraccanbeaccepted
by setting up lters.
Click Add,thefollowingpageappears.Inthispage,youcancreatealterruletoidentifyincomingIPtracbyspecifyinga
new lter name and at least one condition. All specied conditions in this lter rule must comply with the rule. Click Save/
Apply to save and activate the lter.
You should select at least one WAN interface to apply this rule.

D-Link DSL-520B Specifications

Data Transfer Rates

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite downstream	up to 1.5 Mbps
G.lite upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 12 Mbps
ADSL full rate downstream	up to 24 Mbps
ADSL full rate upstream	up to 1 Mbps

Interfaces

ADSL interface	RJ-11 connector
LAN interface	RJ-45 port
Ethernet	10/100BASE-T