Unified Services Router User Manual
23
Figure 8: DMZ configuration
In order to configure a DMZ port, the router‘s configurable port must be set to
DMZ in the Setup > Internet Settings > Configurable Port page.
2.4 Universal Plug and Play (UPnP)
Advanced > Advanced Network > UPnP
Universal Plug and Play (UPnP) is a feature that allows the router to discovery
devices on the network that can communicate with the router and allow for auto
configuration. If a network device is detected by UPnP, the router can open internal
or external ports for the traffic protocol required by that network device.
Once UPnP is enabled, you can configure the router to detect UPnP-supporting
devices on the LAN (or a configured VLAN). If disabled, the router will not allow for
automatic device configuration.
To Next Page
Loading...
Need help?
General
